Brow & Lash Dye Auburn

Remember to always perform a patch test 48H before the treatment.

Please follow the instructions that come with the Brow & Lash Dye Starter Kit or follow our free or certified Brow & Lash Dye course.

PROCESSING TIMES

Brows:
For an Ombre effect on any brows remove just the fronts of the brows after 3-5 minutes with a damp cotton pad.
Gentle effect: For a gentle tint effect, remove the rest of the dye after 8-10 minutes to give your client a softer and more natural look.
Statement look: If a stronger, more statement look is what your client desires then remove the remaining dye after 10-15 minutes.
Extra bold: Finally for those clients who want the full tattooed, bold brow effect then remove the dye after the maximum processing time of 15-20 minutes.

Lashes:
Subtle look: 5-7 minutes for a more subtle look suited to very fair clients with white or transparent lashes.
Intensive lash look: Leave on for 8-10 minutes for a deep, mascara effect and intensive lashes.

STEPS

STEP 1:
Cleanse the eyebrow area/eyelashes with the Supercilium Pro Cleanser. It is also suitable for sensitive skin as its doesn't contain any harsh chemicals. For the brow area: Use the Supercilium Prep Peel Gel to get rid of excess sebum, make-up buildup, and dead skin cells to ensure the longevity of Brow Dye treatments. Apply one drop on each eyebrow, massage it gently into the brow for 15 seconds and carefully remove it with a cotton pad with Supercilium Pro Cleanser. If needed you can add a double cleanse by using the Color Booster to degrease the skin and hairs.

STEP 2:
Apply Brow Paste to the area around the eyebrows, avoiding zones you are going to tint. Apply a thin layer of Brow Paste to the area around the eyes, avoiding touching the eyelashes. Set the protective eye pads along the edge of the lower eyelids, having the lower eyelashes out from under the eye pads.

STEP 3:
In a non-metallic tare, thoroughly mix Oxydant Developer and Brow & Lash Dye in a ratio of 1:1 until a homogeneous consistency. We recommend using 0.5 cm of dye and an equal proportion of Oxidant Developer. Let the dye sit for one minute before you apply it. Make sure you did a patch test before applying the brow tint or lash tint!

STEP 4:
Using a Medium Angled Brush, quickly and evenly apply a thin layer of the prepared mixture to the eyebrows, strictly to the desired shape. Carefully tint the skin by raising the eyebrow hairs. Watch out for the clarity of the lines. Carefully and evenly apply the dye to the eyelashes. During the tinting procedure, the eyes should be closed.

STEP 5:
The processing time for eyebrows is 8-20 depending on the desired result: the more intense shade and tinting effect you want, the more time you need. The processing time for eyelashes is 5-10 minutes.

STEP 6:
After processing, remove the brow tint/ lash tint from the eyebrows/eyelashes with a wet cotton pad. Wash off the residues with water. Do not open the eyes until the dye is completely removed. The result of tinting depends on the type of skin, colour type, individual organism characteristics.

STEP 7:
If you accidentally tinted the skin, apply a small amount of Color Corrector to a micro brush or cotton swab and gently wipe this area. Repeat if needed. Wash off the residues with water.

Please follow the instructions that come with the Brow & Lash Dye or follow our free or certified Brow & Lash Dye course.

AQUA (WATER), CELLULOSE GUM, SODIUM HYDROXIDE, SODIUM SULFITE, P- PHENYLENEDIAMINE, RESORCINOL, CI 16035, CI 73015